PCD Turning Inserts
PCD Turning Insert CNMF
PCD-TI-001
Fine-finishing insert for aluminum pistons and housings.
PCD Tipped Turning Inserts
For 90% of non-ferrous turning operations, you don’t need a full diamond edge—you only need diamond where it touches the material.
PCD Turning Inserts
PCD Tipped Turning Inserts
For 90% of non-ferrous turning operations, you don’t need a full diamond edge—you only need diamond where it touches the material.
Overview
For 90% of non-ferrous turning operations, you don’t need a full diamond edge—you only need diamond where it touches the material.
Sundi PCD Tipped Turning Inserts feature a premium
Technical Specifications
Specifications
| Tech Data | |
|---|---|
| Type | ISO Indexable PCD inserts |
| Angle | Positive/ negative |
| PCD Grade | PCD 850/ PCD 010/PCD 025/PCD302 |
| Tolerance | G/M |
| Work piece material | Aluminum and aluminum alloys Copper, brass and bronze alloys Carbon Fiber Graphite composites Reinforced plastics Ceramic Wood Fiberglass Composites Fiber Reinforced Plastics (FRP) Tungsten C |
Specifications
| Shape | Designation | D1 [mm] | D2 [mm] | S [mm] | R [mm] |
|---|---|
| CCMT060202 | 6.35 | 2.8 | 2.38 | 0.2 | |
| CCMT09T304 | 9.525 | 4.4 | 3.97 | 0.4 |
| CCGT120408 | 12.7 | 5.5 | 4.76 | 0.8 |
| CCGW060204 | 6.35 | 2.8 | 2.38 | 0.4 | |
| CCGW09T304 | 9.525 | 4.4 | 3.97 | 0.4 |
| CCGW120404 | 12.7 | 5.5 | 4.76 | 0.4 |
| DCGT070202 | 6.35 | 2.8 | 2.38 | 0.4 | |
| DCGT11T304 | 9.525 | 4.4 | 3.97 | 0.4 |
| DCMW070202 | 6.35 | 2.8 | 2.38 | 0.2 | |
| DCGW11T304 | 9.525 | 4.4 | 3.97 | 0.4 |
| TCGT090202 | 5.56 | 2.5 | 2.38 | 0.2 | |
| TCGT110202 | 6.35 | 2.5 | 2.38 | 0.2 |
| TCGT16T304 | 9.525 | 2.8 | 2.38 | 0.4 |
| TCGW090202 | 5.56 | 2.5 | 2.38 | 0.2 | |
| TCGW110204 | 6.35 | 2.5 | 2.38 | 0.4 |
| TCGW16T304 | 9.525 | 2.8 | 2.38 | 0.4 |
| VCGT110302 | 6.35 | 2.8 | 3.18 | 0.2 | |
| VCGT160404 | 9.525 | 2.8 | 4.76 | 0.4 |
| VCGW110302 | 6.35 | 2.8 | 3.18 | 0.2 | |
| VCGW160404 | 9.525 | 2.8 | 4.76 | 0.4 |
Need a quote for this product?
Send your drawing or quantities — our engineers reply within 24 hours.
PCD Tipped Turning Inserts
Related Products
SUNDI
PCD Turning Inserts
PCD Boring Inserts
Are you facing challenges with chatter, tapered holes, or poor surface finishes during internal turning (boring) operations?
SUNDI
SUNDI
PCD Turning Inserts
PCD Full Edge Turning Inserts
Standard PCD inserts only have a small diamond tip, limiting your depth of cut to just a few millimeters. When you need to remove massive amounts of material or perform wide plunge cuts, you